What do you do when your Android says no command?

Another simple way to clear the no command on Android is by removing the battery of your android phone. Before you remove the battery, first switch off the phone. Wait for some time, then put in the battery into the android phone again. Turn your android back on and see if the error is gone or not.

How do I fix no command error?

Fix No Command error to access Recovery Mode

  1. Press and hold Power+Volume Up keys.
  2. Press and hold Power+Home+Volume Up keys.
  3. Press and hold Power+Volume Down keys.
  4. Press and hold Power+Home+Volume Down keys.
  5. Press and hold Power+Home keys.

Why does my Android say no command?

If presented with an image of a broken Android with “No Command” shown on the screen, do the following: Press and hold the Power button. While holding the Power button press the Volume Up button then release the Volume Up button then the Power button.

How do I fix my Android it wont boot into recovery?

In recovery mode, you can do the followings,

  1. Reboot system now.
  2. Reboot to bootloader.
  3. Apply update from ADB.
  4. Apply update from external storage.
  5. Apply update from cache.
  6. Wipe data/factory reset.
  7. Wipe cache partition.
  8. Power down.
IT IS INTERESTING:  Why did my contact names disappear Android?

How do I force an Android into recovery mode?

How To Access Android Recovery Mode

  1. Turn off the phone (hold power button and select “Power Off” from the menu)
  2. Now, press and hold Power+Home+Volume Up buttons..
  3. Keep holding until device logo shows up and phone restarts again, you should enter recovery mode.

How can I bypass no command?

Steps To Bypass the “No Command” Screen To Enter Into Recovery Mode Android

  1. Press Power, Volume Down, Volume UP, Home Button to bring up the Menu. …
  2. Press Volume Up and Down simultaneously.
  3. Press Power and Volume Down.
  4. Press Power and Volume Up.
  5. Press Power + Down Volume and Home Button.

How do I get into recovery mode?

Hold down the Power button and turn your phone off. Press and hold the Volume Down and Power buttons simultaneously until the device turns on. You can use Volume Down to highlight Recovery Mode and the Power button to select it.

What is Android rescue mode?

Android 8.0 includes a feature that sends out a “rescue party” when it notices core system components stuck in crash loops. Rescue Party then escalates through a series of actions to recover the device. As a last resort, Rescue Party reboots the device into recovery mode and prompts the user to perform a factory reset.

What is bootloader in Android?

In the simplest terms, a bootloader is a piece of software that runs every time your phone starts up. It tells the phone what programs to load in order to make your phone run. The bootloader starts up the Android operating system when you turn on the phone.

IT IS INTERESTING:  Should I buy an iPad or Android tablet?

How do I fix Bootloop without recovery?

Steps to Try When Android is Stuck in a Reboot Loop

  1. Remove the Case. If you have a case on your phone, remove it. …
  2. Plug into a Wall Electric Source. Ensure your device has enough power. …
  3. Force Fresh Restart. Press and hold both the “Power” and “Volume Down” buttons. …
  4. Try Safe Mode.

How do you fix a dead android?

How to fix a frozen or dead Android Phone?

  1. Plug your Android phone into a charger. …
  2. Switch off your phone using the standard way. …
  3. Force your phone to restart. …
  4. Remove the battery. …
  5. Perform a factory reset if your phone cannot boot. …
  6. Flash your Android Phone. …
  7. Seek help from professional phone engineer.

How do I get my Android out of boot mode?

To get out of Safe Mode:

  1. 1 Press the Power button and select Restart.
  2. 2 Alternatively, press and hold the Volume Down and Side key at the same time for 7 seconds. …
  3. 1 Use the Volume Up or Volume Down button to highlight the option Reboot system now.
  4. 2 Press the Power button to confirm the selection.
Operating system secrets